High-Resolution Digital Inspection Solution Unveiled

November 15, 2021November 15, 2021 Keith Mills Publishing Editor

ASH is unveiling its next generation of high-resolution digital inspection solutions at Productronica 2021.

Inspex 4K is an advanced inspection solution which delivers four times the resolution of full HD inspection systems. Experience crystal clear ultra-high-definition video imaging allowing users to see more detail than ever before. A simple intuitive interface empowers the end user to inspect parts with ease, simplicity, and comfort. Inspex 4K speeds up inspection processes by identifying defective parts faster, easier and in super high resolution.

Inspex 4K offers high magnification, autofocus, manual focus. auto exposure, white balance and more features:

– Ultra HD Resolution 3840 x 2160 pixels

– 85x Optical Zoom (tested with 27” monitor and

– +10 Plan 1x Lens)

– 170x Digital Zoom

– Low Video Latency – Faster image response for rework & observing moving parts

– Superb Image Quality.

Inspex 4K user benefits include:

– Improve defect detection

– Ergonomic digital solution

– Improve throughput

– Reduce production waste

– Increase efficiency

For more information: www.ashvision.com

HOME PAGE LINK

Smart Maintenance – Integrated Learning System Uses Artificial Intelligence
December 1, 2023
Integrated, learning maintenance system identifies potential faults early, avoiding more than 500 minutes of vehicle assembly disruption every year.
Foundry Guarantees Product Quality With 3D Scanning Arm
December 1, 2023
With only a Coordinate Measuring Machine (CMM), Fonderies Fraisse had until that point been restricted in the range of checks it could carry out. The size of the CMM imposed limits as to the size of the parts to be checked.
Balancing Key Factors in Selecting Calibration Providers
December 1, 2023
In the calibration industry, decision-makers grapple with a complex interplay of three critical factors: quality, lead time, and price. These elements seldom align perfectly, creating a challenging decision-making landscape.
November 2023 Metrology News Magazine
November 30, 2023
AI is likely to impact manufacturing quality control with AI-powered vision systems inspecting products with a level of precision and speed difficult for humans to match offering improved product quality and defect reductions.
TwinBox Offers Compact Solution for Production Robot Integration
November 30, 2023
RoboDK TwinBox represents the latest step in production robot programming for automation engineers. This compact system integrates pre-installed RoboDK software into industrial PCs and small single-board computers or IPCs.
Next Generation High-Performance Global Shutter CMOS Image Sensors Launched
November 30, 2023
Teledyne e2v has announces Emerald Gen2, its new state-of-the-art CMOS image sensor family. Built on Teledyne e2v’s advanced imaging technologies, this new family delivers enhanced performance, making the new sensors ideal for a wide range of machine vision uses.
NIST Seeks Collaborators for Consortium Supporting Artificial Intelligence Safety
November 30, 2023
The U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) is calling for participants in a new consortium supporting development of innovative methods for evaluating artificial intelligence (AI) systems to improve the rapidly growing technology’s safety and trustworthiness.
Seal 3D Scanner Aims To Democratize High Precision 3D Scanning
November 29, 2023
Seal 3D Scanner groundbreaking technology, which utilizes blue light encoded structured light with a shorter wavelength, enables it to project refined structured light and achieve unparalleled accuracy.
MSP Brings Metrology and Right-First-Time Expertise To Advanced Manufacturing Facility
November 29, 2023
The centre will benefit from MSP’s full PerfectPart suite of products across its CNC machine tools. This includes a fully-automated AutoClock for automated and accurate probe setup and calibration as well as NC-Checker and NC-PartLocator for machine capability checking, automated part location and in-process measurements.
PI Substantially Increases Hexapod Production Capacities
November 29, 2023
The factory layout for the new hexapod production was developed by PI experts, with the support of specialists from the Fraunhofer Institute for Manufacturing Engineering and Automation IPA.

Digital Metrology Ecosystem Empowers Digital Transformation at Global Auto Supplier
November 28, 2023
As the use of 3D measurement devices spread, a new need emerged to effectively leverage the measurement data obtained through the combined measurement and inspection process, since it contains valuable know-how and verification results.
Line Scan Versus Area Scan Technology
November 21, 2023
Unlike area-scan cameras that capture the entire object in one frame, line scan cameras contain a single row of pixels, building the final 2D image pixel line by pixel line as the object moves past the camera.
CMM Controller Retrofits Enable Multi-Sensor Production Inspection
November 13, 2023
As a result of the improvements, the sealing design and manufacturing specialist has immediately gained the ability to use the Renishaw SP25M tactile scanning probe, which it's hoped will cut metrology cycle times by at least one-third when implemented in early 2024.
Precise Cartesian Gantry Structures Facilitates More Efficient and Flexible Production Lines
November 10, 2023
Cartesian gantries are robotic and motion control systems that operate within a defined three-dimensional space based on the orthogonal X, Y, and Z axes of the Cartesian coordinate system.
Metrology Challenges in Additive Manufacturing: Overcoming Distortion and Porosity Issues in 3D-Printed Metal Parts
November 8, 2023
Additive manufacturing, often referred to as 3D printing, has revolutionized the manufacturing industry by enabling the production of complex and customized parts with unprecedented ease and speed.