Keep Your Eye On All The Very Latest Metrology News

October 2, 2019October 5, 2019 Keith Mills Publishing Editor

Metrology News Bulletin and Newsletter Sign-Up

Click here to see sample publication

Click here to see sample Newsletter

Unsubscribe at any time.

Metrology News will protect the information that is gathered on this site as stated in our privacy policy. It will not be shared, bartered, or sold to any third party.

HOME PAGE LINK

Indoor Remote Radiation Sensing and Mapping
August 5, 2021
Flyability has launched the Elios 2 RAD, an indoor drone equipped with a radiation sensor made just for inspections at nuclear stations. “The Elios 2 RAD represents the first chapter
Automated Inspection for Aerospace via CT
August 5, 2021
Amidst the COVID-19 pandemic, nearly 75% of the world’s aviation fleet was grounded at the peak meaning that fewer than 7,500 aircraft remained airborne. Some estimates state are that it
Smart Digital Monitoring Drives Predictive Maintenance at BMW
August 5, 2021
When it comes to maintaining production systems, the solution of choice at the BMW Group is to use sensors, data analytics and artificial intelligence (AI). So rather than the previous
Inspection Fixture Trio Feature Speed, Size and Weight Advantages
August 5, 2021
Industrial inspection and quality control rely on precision measuring machines and precision fixturing alike. Reliable and repeatable fixture set-up is a basic requirement for successful and accurate measurement. Therefore fixturing
Multiple Degrees-of-Freedom Encoders Launched
August 4, 2021
With the release of new MULTI Degrees-of-Freedom (MULTI-DOF) encoders, HEIDENHAIN offers machine manufacturers a better way to implement metrology designs to obtain multiple measurements simultaneously and facilitate correcting deviations on
Topology Measurements for Multilayer Circuits
August 4, 2021
Electronic ceramic components and semi-finished materials, known as co-fired ceramics, enable highly compact, robust, and durable multilayer circuits to be produced. During production, white light interferometers from ISRA VISION check
5 Axis CMM Software Offers High-Performance Industrial Inspection
August 4, 2021
Renishaw’s MODUS metrology software continues to lead the way in high-performance industrial inspection, providing an optimal platform for the performance of Renishaw’s REVO 5‑axis multi-sensor measurement system for coordinate measuring machines
CERN Accelerates Metrology With 3D Scanning Technology
August 4, 2021
Several months ago, a new recruit joined the ranks of the metrology laboratory’s measuring devices. It may be less imposing in scale than the many other pieces of kit for
New Laser Interferometer Offers Quality Measurement of Optics and Wavefront Transmission
August 4, 2021
4D Technology Corporation has announced the release of the newest addition to the line of PhaseCam dynamic interferometers, supported by the release of 4Sight Focus Acquisition and Analysis Software. PhaseCam
Ultrasonic Thickness CMM Measurement Probe Launched
August 3, 2021
Renishaw will showcase the latest addition to its market-leading range of products for CMMs at the upcoming EMO exhibition. The new RUP1 ultrasonic thickness measurement probe increases the multi-sensor capability

Dynamic Micro-CT and Importance of Temporal Resolution
August 3, 2021
Micro-CT, which employs X-rays to collect 3D data, has proven extremely useful for non-destructive examination. As the technique and its capabilities have matured, it is now being used to better
Thermal Surface Profilometry – Characterising the Temperature-Induced Topographical Evolution
July 27, 2021
Optical profilometry is a rapid, non-destructive, and non-contact surface metrology technique, which is used to establish the surface morphology, step heights and surface roughness of materials. It has a wide
Producing Memory From Speckle Patterns
July 27, 2021
A team of researchers has developed a way to significantly increase the memory of speckle patterns, the very complex patterns that result from shining a laser light onto an opaque
Unlocking Standards For The Fourth Industrial Revolution
July 26, 2021
The UK’s National Quality Infrastructure (NQI) partners, NPL, BSI and UKAS with the Department for Business, Energy and Industrial Strategy have published Standards for the Fourth Industrial Revolution, an Action
Measurement Platform Inspects Electric Drive Components Real Time
July 15, 2021
Electric drives consist of a fixed stator and a moving rotor; in order to achieve optimum drive performance and low wear, both components must be matched to each other with