High-Resolution Optical Measurement Offers Exceptionally Large Field of View

Epigem has announced that its quality control of transparent electronic film had taken a significant step forward, due to UK’s Loughborough University’s pioneering research on surface measurement based on inexpensive fibre-optics and mobile phone cameras.

As a partner in the project, “Synthetic aperture interferometry: High-resolution optical measurement over an exceptionally large field of view”, the UK based company challenged the University to develop instrumentation to inspect and measure precision embossed thin film and microfluidic devices.

Loughborough’s solution is an array of cameras and sources that produces a sequence of digital holographic images that can be combined to synthesise the output of an interference microscope but with 10,000 times the field of view.

In order to meet this challenge, the University has developed methods to micro-machine the tip of optical fibres and has exploited Additive Manufacturing (AM) to produce miniature, digital holographic cameras. Each camera is connected to a Raspberry Pi single board computer to pre-process the images before the data is combined to provide a map of surface height.

Using the developed technology, Loughborough researchers have demonstrated surface height measurements with a precision of 10 nanometres, a lateral resolution of 1.7 micrometres and a field of view of almost 50 x 50 mm. The next step is to produce an array of 225 cameras, which could achieve similar measurement precision with a lateral resolution of 0.85 micrometres and a field of view of 100 x 100 mm.

Tim Ryan, Epigem’s Managing Director, said: “This is a fantastic achievement, progressing in a very short time from idea, to design, converting to hardware through to development. It has huge potential for quality control of electronic films and our microelectrode enabled products. Interferometry can tell us a lot about the roughness of a surface. As Epigem expands its measurement for the life sciences capability, we are now asking ourselves where else the technology can be applied.”

Jeremy Coupland, Professor of Applied Optics and Associate Dean (Research) at the Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University said: “We have made a huge step forward here using inexpensive over-the-counter technology to build what is essentially a gigantic interference microscope and are now looking to exploit this technology in real-world applications.You could say that we are developing cutting-edge metrology with a few mobile phones and Christmas tree lights!”

This project is a partnership between Loughborough University, Taylor Hobson, the National Physical Laboratory (NPL), The Manufacturing Technology Centre (MTC) and Epigem, and is funded by the EPSRC (EP/M020940/1).

FURTHER NEWS
Image Sensor Sets New Standard for Image Quality and Frame Rate

For more information: www.epigem.co.uk